The jack-of-all-trades in core drilling
Core drills are used by construction professionals in a wide range of applications including building renovation and utility works. They are relied on to install drainage, sewer and water pipes, plus cable and ventilation ducts where large and deep holes are needed. Core sampling in asphalt roads is another perfect application for this high performing drill.
Safer with torque control
Due to the non-kick back operation, you can drill holes of up to 200 mm in diameter free hand
No sparks
There are no electrical components, which means it´s safe to use the hydraulic core drills indoors
Can be used under water
Our core drills can be used for wet diamond core drilling on the toughest jobs
Easy transport
Our core drills come in a strong steel case for an easy sand safe transport.
Prepared for drill stands
Standard round 60mm front-end makes it fit to the majority of standard drill stands
Technical specifications
| Model | LCD 500 | LCD 1500 |
|---|---|---|
| Weight incl. hoses | 9.5 kg (21 lb) | 9 kg (20 lb) |
| Service weight incl. tool (112 mm) | 13 kg (29 lb) | 13 kg (29 lb) |
| Length without drill | 414 mm (16 in) | 406 mm (16 in) |
| Oil flow | 20-30 l/min (5.28-7.93 gpm) | 20-30 l/min (5.28-7.93 gpm) |
| Working pressure | 60-120 bar (1,160-2,495 psi) | 60-120 bar (1,160-2,495 psi) |
| Revolutions | 600-900 rpm | 1,500-2,250 rpm |
| Drill diameter | 50-202 mm (1,968 1/2-7,952 23/32 in) | 12-75 mm (15/32-2 15/16 in) |
| Thread female (drive shaft) *1 | 1/2″ BSP | 1/2″ BSP |
| Vibration level 3 axes (ISO 28927-5), 20 lpm *2 | 3.1 m/s² | 2.7 m/s² |
| Sound pressure level (ISO 11203) *2 | <70 Lp, r=1dB(A) | <70 LP, r=1 dB(A) |
| EHTMA class | C/D | C/D |
| Part number | 1806 1014 38 | 10806 1014 39 |
| *1 1/2″ BSP male x 1 1/4 UNC male drive adaptor included for use of larger diameter core bits *2 important: full details of measurements is available in the Safety and Operating instruction of the product. | ||
Bits
| Diamond core bits (thread 1 1/4 UNC) | mm (in) | 62 (2 7/16) | 82 (3 1/4) | 102 (4) | 112 (4 3/8) | 132 (5 1/4) | 152 (6) | 162 (6 3/8) | 200 (8) |
|---|---|---|---|---|---|---|---|---|---|
| Length | mm (in) | 450 (18) | 450 (18) | 450 (18) | 450 (18) | 450 (18) | 450 (18) | 450 (18) | 450 (18) |
| Weight | kg (lb) | 1.7 (3.75) | 2.4 (5.3) | 3.2 (7.05) | 3.7 (8.16) | 4.6 (10.14) | 6 (13.23) | 6.3 (13.9) | 9.9 (21.83) |
| Part number | 3378 0050 61 | 3378 0050 62 | 3378 0050 63 | 3378 0050 64 | 3378 0050 65 | 3378 0050 66 | 3378 0050 67 | 3378 0050 68 |
Water kit
| Water kit with pressure tank | ||
|---|---|---|
| Water volume | l (gal) | 10 (2.6) |
| Size (W+H+D) | mm | 220*620*250 (9*24*10) |
| Weight | kg | 8 (18) |
| Comments | Water supply for LS cut-off saw and LCD core drill | |
| Part number | 3371 8090 02 |
DIP centrifugal pumps for clean viscosity fluids
– Large grip: it´s got a great grip, which makes it easy to carry around.
– Safe air intake: the strainer prevents contaminants from entering the pump.
– Power to weight: compact design and a high-output pneumatic motor give the DIP pumps high capacity in relation to petrol and electric motors of the same weight.
– Leak-free: a specially designed rotating mechanical seal prevents leakage.
– Submersible action: the DIP is submersible with the optional non-return valve. Alternatively you can connect a hose to keep the air outlet above surface.
– Quiet please: Attach the optional silencer to improve working conditions
– Stainless protection: the stainless steel impeller is resistant to both corrosion and many chemicals.
DIP 65
| Energy | Pneumatic |
| Max. head | 59 m |
| Pump flow max | 660 l/min |
| Air consumption | 70 l/s |
| Weight | 23 kg |
| Fluid outlet thread | G 2 1/2 |
| Air inlet | G 3/4 |
| Air outlet | G 1 1/2 |
| Width | 0 mm |
| Oil flow | 0 l/min |
| Working pressure | 0 |
| Part number | 8492 0106 19 |
Accessories
| Equipment | incl. | Part numbers |
|---|---|---|
| DIP 65 kit | 8492 0106 27 | |
| 1x Pump | ||
| 2x Outlet hose 63 mm x 32 m incl. fittings | 4950 0191 90 | |
| 1x Lubricator CLG 30 | 8202 5102 39 | |
| 1x Non-return valve with pipe | 3330 0032 91 |
– Large grip: it´s got a great grip, which makes it easy to carry around.
– Safe air intake: the strainer prevents contaminants from entering the pump.
– Power to weight: compact design and a high-output pneumatic motor give the DIP pumps high capacity in relation to petrol and electric motors of the same weight.
– Leak-free: a specially designed rotating mechanical seal prevents leakage.
– Submersible action: the DIP is submersible with the optional non-return valve. Alternatively you can connect a hose to keep the air outlet above surface.
– Quiet please: Attach the optional silencer to improve working conditions
– Stainless protection: the stainless steel impeller is resistant to both corrosion and many chemicals.
DIP 35
| Energy | Pneumatic |
| Max. head | 35 m |
| Pump flow max | 1,320 l/min |
| Air consumption | 70 l/s |
| Weight | 23 kg |
| Fluid outlet thread | G 2 1/2 |
| Air inlet | G 3/4 |
| Air outlet | G 1 1/2 |
| Width | 0 mm |
| Oil flow | 0 l/min |
| Working pressure | 0 |
| Part number | 8492 0103 38 |
Accessories
| Equipment | incl. | Part numbers |
|---|---|---|
| DIP 35 kit | 8492 0103 61 | |
| 1x Pump | ||
| 1x Outlet hose 63 mm x 32 m incl. fittings | 4950 0191 90 | |
| 1x Lubricator CLG 30 | 8202 5102 39 | |
| Non-return valve with pipe | 3330 0032 91 |
]]>
DIP centrifugal pumps for clean viscosity fluids
– Large grip: it´s got a great grip, which makes it easy to carry around.
– Safe air intake: the strainer prevents contaminants from entering the pump.
– Power to weight: compact design and a high-output pneumatic motor give the DIP pumps high capacity in relation to petrol and electric motors of the same weight.
– Leak-free: a specially designed rotating mechanical seal prevents leakage.
– Submersible action: the DIP is submersible with the optional non-return valve. Alternatively you can connect a hose to keep the air outlet above surface.
– Quiet please: Attach the optional silencer to improve working conditions
– Stainless protection: the stainless steel impeller is resistant to both corrosion and many chemicals.
DIP 25
| Energy | Pneumatic |
| Max. head | 25 m |
| Pump flow max | 1,680 l/min |
| Air consumption | 70 l/s |
| Weight | 23 kg |
| Fluid outlet thread | G 2 1/2 |
| Air inlet | G 3/4 |
| Air outlet | G 1 1/2 |
| Width | 0 mm |
| Oil flow | 0 l/min |
| Working pressure | 0 |
| Part number | 8492 0103 20 |
Accessories
| Equipment | incl. | Part number |
|---|---|---|
| DIP 25 kit | 8492 0103 53 | |
| 1x Pump | ||
| 1x Outlet hose 76 mm x 25 m incl. fittings | 3330 0034 91 | |
| 1x Lubricator CLG 30 | 8202 5102 39 | |
| 1x Non-return valve with pipe | 3330 0032 91 |
Breaker doubles as a drill
Cobra
Combi is a great breaker aimed at lighter materials. Impact rate is higher and impact energy is lower compared to its brothers. And when you combine high impact rate and lower impact energy with rotation, you get a very powerful drill. This multi-purpose machine can drill up to 30 cm per minute in solid granite and to depths of up to two metres, thanks to its built-in air flushing device.
Technical specifications
| Weight | 25 kg |
| Length | 732 m |
| Depth | 281 mm |
| Width across handles | 585 mm |
| Impact energy | 22-25 joules |
| Blow frequency | 2,700 bpm |
| Drill depth | 6 m |
| Engine type | 1 cylinder, two-stroke |
| Cylinder Displacement | 185 cc |
| Power | 2 kW |
| Cooling system | Fan cooled |
| Starter system | Magnapull |
| Fuel type | Petrol, 90-100 octane unleaded |
| Fuel capacity | 1.2 l |
| Fuel mixture | 2 % |
| Fuel consumption | 1.1 l/h – 1.4 l/h |
| Alkylate | no |
| Vibration level 3 axes (ISO 28927-10) | 5,8 (breaking), 9,3 (drilling) m/s² |
| Sound power level guaranteed (2000/14/EC) | 108 dB(A) |
| Sound pressure level (ISO 11203) | 95 Lp. dB(A) |
| Shank size: Hex | 22×108 mm – 7⁄8 x 4 1⁄4 inch |
| Hex 22×108 – ⅞ x 4 ¼ inch | 8318 0800 08 |
Make every liter of air count. Every pneumatic underground rock drill combines light weight, high torque and high impact energy.
Underground rock drills
Pneumatic tools for raise driving, bolting and screening.
| (at 6 bar) | BBC 16W | BBC 34W | BBD 94W | BBD 94WS | |
|---|---|---|---|---|---|
| Hole range | mm | 27-41 | 27-41 | 27-41 | 27-41 |
| Weight | kg | 28,5 | 33,5 | 28 | 31 |
| Length | mm | 705 | 775 | 670 | 670 |
| Air consumption | l/s | 69 | 88 | 97 | 97 |
| Impact rate | blows/min | 2340 | 2280 | 3300 | 3300 |
| Piston diameter | mm | 70 | 80 | 90 | 90 |
| Stroke length | mm | 55 | 70 | 45 | 45 |
Stopers
Available with front flushing (BBC 34), which keeps water and cutting out of your drill. The BBD 46 WR offers clock-wise rotation for bolting.
| BBD 46WS-8 | ||
|---|---|---|
| Hole range | mm | 27-41 |
| Weight | kg | 40 |
| Length | mm | 1650-2620 |
| Air consumption | l/s | 90 |
| Impact rate | blows/min | 3000 |
| Piston diameter | mm | 75 |
| Stroke length | mm | 45 |
Pusher legs
Pusher legs to support your drilling application. Available as single or double telescopic pusher legs.
| BMT 51 | ALF 71 | ALF 71-1 | ALF 72D | ALF 72D-1 | BMK 625 | ||
|---|---|---|---|---|---|---|---|
| Suitable for rock drill | BBC 16W, 34W | BBC 16W, 34W | BBC 16W, 34W | BBD 94W | BBD 94W | RH 656W | |
| Feeding length | mm | 1300 | 1300 | 1300 | 1300 | 1300 | 1300 |
| Length | mm | 1658-2958 | 1805-3105 | 1455-2405 | 1970-3270 | 1830-3030 | 1815-3115 |
| Weight | kg | 15 | 14 | 13 | 19 | 16 | 17 |
| Piston bore | mm | 60 | 70 | 70 | 70 | 70 | 53 |
Pneumatic drills for construction, road works and quarrying
We know the drill when it comes to reliable and comfortable handheld tools. Our range of surface rock drills is ready to tackle any job: horizontal or vertical, light or heavy.
Our light surface rock drills are perfect for:
- Horizontal drilling
- Plug hole drilling
- Drilling in concrete
| DKR 36 | BBD 12 D | BBD 12 DS | BBD 15 T | BBD 15 TS | BBD 15 ET | ||
|---|---|---|---|---|---|---|---|
| Weight | kg | 4,5 | 9,8 | 10,7 | 11,1 | 12,1 | 15,6 |
| Length | mm | 375 | 565 | 565 | 505 | 505 | 575 |
| Air consumption | l/s | 10 | 24 | 22 | 22 | 24 | 22 |
| Impact rate | blows/min | 2820 | 2580 | 2580 | 2580 | 2580 | 2520 |
| Shank size | mm | R19 x H14,7 x 89 | 19 x 108 | 19 x 108 | 22 x 108 | 22 x 108 | 22 x 108 |
Our heavy surface rock drills are suitable for:
- Quarrying
- Production drilling
- Mining
| SRD 20 | SRD 25 | ||
|---|---|---|---|
| Weight | kg | 24 | 27 |
| Length | mm | 590 | 600 |
| Air consumption | l/s | 39 | 50 |
| Impact rate | blows/min | 2040 | 204 |
| Shank size | mm | 22 x 108 | 22/25 x 208 |
Pneumatic dust collector
.JPG/jcr:content/renditions/cq5dam.web.1600.1600.jpeg)
Breaking is a dirty job, but with a dust collector the operator is protected against the most harmful dust. Atlas Copco’s pneumatic dust collectors use vacuum technology to efficiently remove dust directly at the source and keep the silica dust level on your construction site below the permissible exposure limit. They work indoors as well as outdoors and don’t require power, only a reliable source of compressed air.
| Weight incl tripod stand | kg | 25 |
| Air consumption at 6 bar | l/s | 11-12 |
| Vacuum suction | mm of H2O | 1340 |
| Air inlet connection compatible for US claw coupling | mm | 12.7 |
| Suction hose | mm | 38 |
| Filter surface area | m² | 2 |
| Collection sack, flat dimensions | mm | 560 x 700 |
| Diameter of housing unit | mm | 365 |
| Height of housing unit | mm | 760 |
| Height above ground | mm | 1310 |
| Technical data DCP 10 dust collector | ||
CARBURETTOR MODEL AVAILABLE ONLY!! PLEASE CONTACT US FOR FURTHER DETAILS
| Weight | 23 kg |
| Length | 877 m |
| Depth | 331 mm |
| Width across handles | 320 mm |
| Impact energy | 60 joules |
| Blow frequency | 1,440 bpm |
| Drill depth | 0 m |
| Engine type | 1 cylinder, two-stroke |
| Cylinder Displacement | 90 cc |
| Power | 2 kW |
| Cooling system | Fan cooled |
| Starter system | Recoil starter |
| Fuel type | Alkylat or 90–100 octane unleaded petrol |
| Fuel capacity | 1 l |
| Fuel mixture | 2 % |
| Fuel consumption | 0 l/h – 0.9 l/h |
| Alkylate | yes |
| Vibration level 3 axes (ISO 28927-10) | 3.8 m/s² |
| Sound power level guaranteed (2000/14/EC) | 109 dB(A) |
| Sound pressure level (ISO 11203)
Shank |
96 Lp. dB(A)
28x160mm |
| Hammer type | Vibro-reduced |
| Hammer version | silenced |
| Weight | 12 kg |
| Length | 590 mm |
| Air consumption | 20 l/s |
| Impact rate | 1,620 blows/min |
| Vibration level 3 axes (ISO 28927-10) | 4 m/s² |
| Sound power level guaranteed (2000/14/EC) | 105 dB(A) |
| Sound pressure level (ISO 11203) | 93 Lp. dB(A) |
| Tool retainer | latch |
| Shank size: Hex | 22×82,5 mm – 7/8×3 1/4 inch ; 25×75 mm – 1×3 inch (round shank with square collar) |